Pickling Powder 500g

Description

Please note – for full details about the nature of this product and potential risks, please read the Material Safety Data sheet attached in our FAQ section.

Pickle powder is mixed with water to form a solution which has a Sodium BiSulpate base. Pickling is recommended after heat treatment / soldering to remove surface fire stain. Pickle powder should be used warm.

Manufacturer’s instructions should be followed when using Pickle powder (see our data sheet). Avoid contact with: Skin – will cause irritation. Clothing – will damage upon contact. When placing objects in and out of solution always ensure the use of either plastic or brass tongs / tweezers.

Other materials are stripped and a deposit (usually copper) is left on any article in the solution.

Binding wire should also be removed as this will cause the same effect. If this happens solution should be replaced.

For Gold and Silver Oxide Removal use 50gms per one litre at 30-80 °C as required. Please add pickle to water, not water to pickle. Mix 50gms per litre use between 30 & 80 degrees centigrade. This is 500gm in weight.

Catalogue Page Number p830