Colorit® Curing Light For Small Scale Production

Description

This COLORIT® light has been designed for curing COLORIT® resins and provides a high power LED light source for effective polymerisation.

Made from robust plastic, this maintenance free light features four power modes for versatility;

• High power mode with an optical output of over 3000 mW/cm²
• Middle power mode with an optical output of over 1800 mW/cm²
• Soft start mode with an optical output that increases from 0 to 1800 mW/cm²
• Flickering mode with an optical output of 1800 mW/cm² that repeats 10 times at 1 second intervals.

When curing COLORIT® resins, it is advised to position the light as close as possible above the curing materials; approximately 1cm or closer. The effectiveness of light power will reduce significantly with increased distance.

The light is easy to operate with a user friendly LED interface that displays all of the functions including; mode, heat indicator, time indicator and battery level.

Other features include:

• Slim and ergonomically designed wireless handpiece (255mm x 115mm x 41.5mm) for adaptable use.
• Single point blue LED light which offers a 430 – 490 nm wave length range.
• A built in optical output checker, to ensure you’re using the required output.
• Rechargeable docking station (155mm x 82mm x 125mm) with red and green power indicators.
• 1 x Orange anti-glare protection screen which is attached directly onto the single point LED light.
• 3.7 V Lithium-ionen battery.

This light is ideal for small scale production, suitable for curing 1 item at a time. However the COLORIT® Light Cube (1VP 059) is available for larger projects or medium scale production.

Full instructions are provided with this light.

Supplied with a 2 pin plug and a 3 pin converter, that you will need to affix.

Catalogue Page Number p925