Nashef BURRO Burr Rotating Holder And Organiser

Description

This Burro Burr Rotating Holder and Organiser from Nashef is the ideal workshop accessory for the professional stone setter, providing the perfect solution for organising all of your 2.38mm (3/32nd) width burrs and drill bits.

The holder also makes your consumption more coat effective as you are using each burr to its full capacity before replacing.

Micheal Nashef, who designed and created this organiser thoroughly researched what tools stone setter’s were buying and using the most of, looking at a range of major brands, sizes and designs to create the ultimate tool holder to aid and enhance productivity.

There are 6 levels to this organiser which are interchangeable and can also be removed or replaced with a duplicate layers.

The layers sit in this order from bottom to top:

• Ball burr – 0.30mm -10.00mm
• 45° 70° 90° Heart burrs – 0.05mm – 0.50mm
• Setting burrs – 0.09mm – 0.80mm
• Cup burr – 0.08mm – 1mm
• Bud burr – 0.06mm – 0.50mm
• Drills – 0.05mm – 0.23mm

The hole at the front of each level is for the burr you are using, with a larger gap behind for extra stock, so you can see what you need to reorder.

Larger holes at the top of the organiser are specifically designed for GRS tools that have a slightly thicker shank.

Please note other shapes of burrs could be used in each level but not all will fit next to each other if the heads are wider.

The smooth 360° rotation provides quick access to each tool that is suitable for the job in hand, whilst having anti slip pads to keep it from moving on your bench which in turn enhances productivity.

This sturdy holder does not need sand added as due to its weight will not move around on you bench whilst you are using it.

Please note this is a holder and does not include drill bits or burrs.

Please note that due to the way these are built webbing may occur but can be brushed off.